Document IIF
Étude des caractéristiques couplées du compresseur centrifuge à grande vitesse et du turbodétendeur d'un réfrigérateur à air de Brayton inversé.
Study on the coupled characteristics of high-speed centrifugal compressor and turboexpander of a reverse Brayton air refrigerator.
Résumé
Reverse Brayton air refrigerators are environmentally friendly and have broad application prospects, which can work under various conditions. In this paper, the characteristics of a open-loop air cycle for room temperature applications were investigated. The compressor and turboexpander in the cycle were modeled by numerical simulation. Based on coupled characteristics of the compressor and expander, a system model was established. The effects of the first stage compression ratio and the expander inlet temperature on the refrigerator performance were studied by experiments. The accuracy of the system model is verified by comparing with the experiments, and the maximum deviations of expander rotating speed and supplied mass flow are 3.1% and 4.83%, respectively. With the increase of the first-stage compression ratio and the decrease of expander inlet temperature, the mass flow rate of supplied air and cooling capacity of the cycle increase. The expander efficiency can be maintained near the optimal value. At the expander inlet temperature of 313.2 K, COP drops by 31.7 % when the cooling capacity is reduced from 3.34 kW to 0.74 kW.
Documents disponibles
Format PDF
Pages : 20-28
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Study on the coupled characteristics of high-speed centrifugal compressor and turboexpander of a reverse Brayton air refrigerator.
- Identifiant de la fiche : 30030949
- Langues : Anglais
- Sujet : Technologie
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 147
- Date d'édition : 03/2023
- DOI : http://dx.doi.org/10.1016/j.ijrefrig.2022.11.022
Liens
Voir d'autres articles du même numéro (12)
Voir la source
-
Comparison of mean-line design methods on match...
- Auteurs : YANG Y., SHENG C., LUO G., CHEN S., HOU Y., CHEN L.
- Date : 01/2023
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 145
- Formats : PDF
Voir la fiche
-
Modeling and simulation of a desiccant assisted...
- Auteurs : NÓBREGA C. E. L., SPHAIER L. A.
- Date : 16/07/2012
- Langues : Anglais
- Source : 2012 Purdue Conferences. 14th International Refrigeration and Air-Conditioning Conference at Purdue.
- Formats : PDF
Voir la fiche
-
Part Load Capability of a High Temperature Heat...
- Auteurs : OEHLER J., GOLLASCH J., TRAN P. A., NICKE E.
- Date : 31/08/2021
- Langues : Anglais
- Source : 13th IEA Heat Pump Conference 2021: Heat Pumps – Mission for the Green World. Conference proceedings [full papers]
- Formats : PDF
Voir la fiche
-
Comparison of the optimum performances of the i...
- Auteurs : ZHANG Y., CHEN J., HE J., et al.
- Date : 02/2007
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 27 - n. 2-3
Voir la fiche
-
Performance prediction and optimisation of twin...
- Auteurs : VIMALAKANTHAN K., READ M., KOVACEVIC A.
- Date : 31/07/2020
- Langues : Anglais
- Source : IIR Rankine Conference 2020.
- Formats : PDF
Voir la fiche