Régulation du transfert de chaleur dans un échangeur de chaleur vertical souterrain pour un système de pompe à chaleur géothermique.
Control of Heat Transfer in a Vertical Ground Heat Exchanger for a Geothermal Heat Pump System.
Auteurs : SALHEIN K., KOBUS C. J., ZOHDY M.
Type d'article : Article de périodique
Résumé
This paper presents a mathematical model of heat transfer behavior between the liquid inside vertical underground geothermal pipes and the surrounding ground for heating (in the winter) and cooling (in the summer) modes in a ground heat exchanger (GHE) that can optimize its output temperature. The GHE’s output temperature reaches the appropriate value when the water velocity is lowered enough. Subsequently, the proposed model was applied to a case study of a 400-ton geothermal heat pump system (GHPS) at Oakland University, in both the heating and cooling modes, to assess its validity and improve the GHE’s performance. The model was implemented in MATLAB using an ordinary differential equation (ODE) solver. Four different water velocities were used to demonstrate the significant effect of velocity on the loop exit temperature. Model predictive control (MPC) was designed to optimize the GHE’s output temperature by controlling the water velocity, which could reduce the energy consumption used for heat and water circulating pumps. The results reveal that the acceptable range of the water velocity for Oakland University’s GHE was between 0.35 and 0.45 m/s, which ensured that the heat pump system delivered the proper temperature to provide the Human Health Building (HHB) with a comfortable temperature regardless of the season. The suggested water velocity ranges in vertical single U-tube pipes with diameters of De 25 mm, De 32 mm, and De 40 mm are between 0.33 and 0.43 m/s, 0.35 to 0.45 m/s, and 0.38 to 0.48 m/s, respectively.
Documents disponibles
Format PDF
Pages : 24 p.
Disponible
Gratuit
Détails
- Titre original : Control of Heat Transfer in a Vertical Ground Heat Exchanger for a Geothermal Heat Pump System.
- Identifiant de la fiche : 30030191
- Langues : Anglais
- Sujet : Technologie
- Source : Energies - 15 - 14
- Éditeurs : MDPI
- Date d'édition : 07/2022
- DOI : http://dx.doi.org/10.3390/en15145300
Liens
Voir d'autres articles du même numéro (10)
Voir la source
Indexation
-
Thermal Impact by Open-Loop Geothermal Heat Pum...
- Auteurs : PERMANDA R., OHTANI T.
- Date : 09/2022
- Langues : Anglais
- Source : Energies - vol. 15 - 18
- Formats : PDF
Voir la fiche
-
Heat transfer analysis of double U-tube ground ...
- Auteurs : KUMAR S., PANDIT J., MURUGESAN K.
- Date : 24/08/2019
- Langues : Anglais
- Source : Proceedings of the 25th IIR International Congress of Refrigeration: Montréal , Canada, August 24-30, 2019.
- Formats : PDF
Voir la fiche
-
Numerical study on the long-term performance an...
- Auteurs : WANG R., WANG F., XUE Y., JIANG J., ZHANG Y., CAI W., CHEN C.
- Date : 05/2022
- Langues : Anglais
- Source : Energies - 15 - 9
- Formats : PDF
Voir la fiche
-
Investigation on the heat transfer performance ...
- Auteurs : ZHANG Y., YOU T.
- Date : 21/08/2023
- Langues : Anglais
- Source : Proceedings of the 26th IIR International Congress of Refrigeration: Paris , France, August 21-25, 2023.
- Formats : PDF
Voir la fiche
-
Exergoeconomic optimization of polymeric heat e...
- Auteurs : CAROTENUTO A., CEGLIA F., MARRASSO E., SASSO M., VANOLI L.
- Date : 11/2021
- Langues : Anglais
- Source : Energies - 14 - 21
- Formats : PDF
Voir la fiche