Compatibilité matérielle des matériaux de systèmes climatiques et frigorifiques avec les frigorigènes à faibles GWP.
Material compatibility of HVAC&R system materials with low GWP refrigerants.
Numéro : pap. 2132
Auteurs : MAJURIN J. A., STAATS S. J., GILLES W.
Résumé
When assessing the suitability of next generation refrigerants for use with current HVAC&R system materials, two areas of concern need to be thoroughly investigated and understood: 1) compatibility of the system materials when in contact with the fluids, and 2) chemical stability of the fluids when exposed to system materials. This paper summarizes material compatibility evaluations of unsaturated hydrofluorocarbon (HFO) refrigerants, and HFO refrigerants blended with R32, that were conducted to better understand equipment reliability risks associated with the use of next generation low global warming potential (GWP) refrigerant candidates. Material compatibility exposures were conducted in Parr pressure vessels with R1234yf, R1234ze(E), and a three refrigerant composite blend of R1234yf, R1234ze(E), and R32 (33% by weight of each), with nine types of elastomers, three gaskets, five polymers, and ten different motor materials. Exposures were conducted in 100% refrigerant, 50% refrigerant:50% lubricant, and 100% lubricant to encompass the range of refrigerant and lubricant compositions that may be present in different areas of operating systems. Two different lubricants, a polyol ester (POE) and a polyvinyl ether (PVE), were evaluated in the study. In total, each of the materials was exposed to twelve different conditions. Results of laboratory measurements of the physical property changes of exposed elastomeric and polymeric materials, and hermetic compressor motor materials, are presented in this paper. In addition, potential system reliability implications of these results, based on a risk-based ranking approach, are reported.
Documents disponibles
Format PDF
Pages : 10 p.
Disponible
Prix public
20 €
Prix membre*
15 €
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Material compatibility of HVAC&R system materials with low GWP refrigerants.
- Identifiant de la fiche : 30013526
- Langues : Anglais
- Source : 2014 Purdue Conferences. 15th International Refrigeration and Air-Conditioning Conference at Purdue.
- Date d'édition : 14/07/2014
Liens
Voir d'autres communications du même compte rendu (203)
Voir le compte rendu de la conférence
Indexation
-
Low-GWP refrigerants options : an assessment of...
- Auteurs : BACHIR B., KAEMMER N.
- Date : 02/09/2013
- Langues : Anglais
- Source : Compressors 2013: 8th International Conference on Compressors and Coolants.
- Formats : PDF
Voir la fiche
-
Effect of lubricating oil additives on compress...
- Auteurs : SAITOH S., HIGASHI T., DANG C., HIHARA E., CHEN Y., SHITARA Y.
- Date : 07/12/2020
- Langues : Anglais
- Source : 14th IIR-Gustav Lorentzen Conference on Natural Refrigerants (GL2020). Proceedings. Kyoto, Japon, December 7-9th 2020.
- Formats : PDF
Voir la fiche
-
Thermal and chemical stability of HFOs.
- Auteurs : ROHATGI N. D. T.
- Date : 29/10/2012
- Langues : Anglais
- Source : ASHRAE/NIST Refrigerants Conference: moving towards sustainability.
- Formats : PDF
Voir la fiche
-
Experimental evaluation on the oil influence in...
- Auteurs : HUERTA A. A. S., FIORELLI F. A. S., SILVARES O. M.
- Date : 10/2009
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 29 - n. 14-15
Voir la fiche
-
Combustion suppression effect of additives for ...
- Auteurs : HIGASHI T., DANG C., HIHARA E., et al.
- Date : 24/08/2019
- Langues : Anglais
- Source : Proceedings of the 25th IIR International Congress of Refrigeration: Montréal , Canada, August 24-30, 2019.
- Formats : PDF
Voir la fiche