Partager

Document IIF

Caractéristiques du transfert de chaleur des coulis d'hydrate d'aluminum ammoniacal.

Flow and heat transfer characteristics of ammonium alum hydrate slurries.

Auteurs : SUZUKI H., KONAKA T., KOMODA Y

Résumé

Flow and heat transfer characteristics of ammonium alum hydrate slurries have been investigated. Ammonium alum hydrate has high latent heat of 251 kJ/kg and its fusion temperature is 51°C when the concentration of ammonium alum in water was set at 35 wt%. The friction and the melting heat transfer coefficients were measured in a pipe flow with 13 mm of diameter. From the results, it was found that the friction coefficient of ammonium alum hydrate slurry shows almost the same value as that of water. On the other hand, the slurry shows higher heat transfer than that of water. Especially, the heat transfer enhanced rate becomes high when the temperature difference between the slurry and the heating flow was set small. This is because of the temperature sustainability of phase change material slurries. From this, it was concluded that ammonium alum hydrate slurry can be a promising candidate for a heating system.

Documents disponibles

Format PDF

Pages : 2010-5

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Flow and heat transfer characteristics of ammonium alum hydrate slurries.
  • Identifiant de la fiche : 2010-1470
  • Langues : Anglais
  • Source : 9th Conference on Phase-Change Materials and Slurries for Refrigeration and Air Conditioning. Proceedings: Sofia, Bulgaria, September 29-October 1, 2010.
  • Date d'édition : 01/09/2010

Liens


Voir d'autres communications du même compte rendu (20)
Voir le compte rendu de la conférence

Indexation